request quote

How to Install a Dishwahser

September 2, 2010 at 6:41 pm | Category: Kitchen Remodeling, Remodeling Contractor



1. Open up your dishwasher installation manual and go through your parts list to make sure you have everything.

2. Locate and connect the hot water line to your dishwasher.

3. Connect your drain line to your dishwasher.

4. Connect your electrical line to your dishwasher. Refer to installation manual for detailed instructions.

5. Carefully guide your water line hose, water drain hose, and electrical line through each hole in your cabinet. Then slide your dishwasher into place.

6.6 Adjust the feet on the bottom of the dishwasher to level off the dishwasher. Use the level to help you level off dishwasher. Once level, secure your dishwasher by screwing it to the underside of the countertop.

7. Refer to installation manual for detailed instructions on how to replace your sink drain pipe with the dishwasher drain pipe. Now connect the dishwasher drain hose to the pipe, using the hose clamp to tighten it.

8. Shut off your hot water line to your sink and connect T connector so that you can run water line from dishwasher. Refer to installation manual for detailed instructions on how to go about hooking up the T connector.


If you are looking for a Denver remodeling contractor then please call 303-833-4715 or complete our online request form.